If your JOYOR T6E or T6E Pro ABE feels limited by the factory 20 km/h speed setting, this guide explains how the JOYOR T6E / T6E Pro speed unlock kit works, what it includes, and how to install it safely.
German ABE versions of the JOYOR T6E and T6E Pro are limited to 20 km/h for public-road compliance. After installing the controller and display tuning kit, the scooter can reach up to around 35 km/h in unlocked mode, depending on rider weight, battery level, tire pressure, road surface, and riding conditions.
Why Riders Choose This Upgrade
For riders who use their scooter on private property, closed tracks, or legally permitted areas, the factory speed limit may feel restrictive. This JOYOR T6E Pro ABE tuning kit provides a cleaner hardware upgrade than unsupported shortcuts or wire cutting.
- Higher performance: Unlocks more speed potential for suitable riding areas.
- Model-specific fit: Designed for compatible JOYOR T6E / T6E Pro ABE scooters.
- Cleaner installation: Uses controller and display hardware instead of unstable tricks.
- Limited mode available: The P10 setting lets you return to the original 20 km/h mode when needed.
Compatibility: Is This Kit Right for Your Scooter?
Before ordering, please confirm your scooter matches the requirements below:
| Check Item | What to Confirm |
|---|---|
| Scooter model | JOYOR T6E / JOYOR T6E Pro |
| Version | ABE / Germany version |
| Upgrade type | Controller and display speed unlock kit |
| Recommended use | Private land, closed tracks, or legally permitted areas |
If you are not sure about your scooter version, check the model label or contact JOYOR Prime before purchasing.
Upgrade Components
The kit includes the main hardware required for the controller and display upgrade.
| Component | What It Does |
|---|---|
| Controller | Manages speed and power output for the upgraded system. |
| Display | Provides access to riding information and the P-setting menu. |
| Switch | Connects with the upgraded controller and display system. |
| Light control module | Helps keep the scooter lighting system working properly after installation. |
Tools to Prepare Before Installation
Before starting, place the scooter on a stable surface and prepare basic tools. The exact tools may vary depending on your scooter condition and previous maintenance.
- Screwdriver set
- Allen key or socket wrench set
- Plastic pry tool
- Cable ties for organizing wiring
- Multimeter, optional, for checking connections
Installation Video
Watch the full JOYOR T6E / T6E Pro speed unlock kit installation video before you begin. It shows how to open the compartment, connect the controller and display, check the wiring, and test the scooter after installation.
Key moments to watch:
- Opening the controller compartment
- Replacing the original controller
- Installing the upgraded display
- Adjusting the P10 speed setting
- Testing the scooter slowly before higher-speed riding
How to Install the JOYOR T6E / T6E Pro Speed Unlock Kit
- Power off the JOYOR T6E / T6E Pro completely.
- Open the deck or controller compartment carefully.
- Locate the original controller and related wiring.
- Install the new controller, display, switch, and light control module by following the video.
- Make sure all cables and connectors are firmly connected.
- Reassemble the scooter carefully and check that no cable is pinched.
- Enter the display settings and adjust the P10 mode.
- Test the scooter slowly in a safe private area before riding at higher speed.
Safety tip: Do not test the scooter at high speed right after installation. Start slowly and check the brakes, throttle response, lights, display, wiring, and overall stability first.
How to Adjust the JOYOR T6E Pro P10 Speed Setting
After the kit is installed, you can use the display's P10 setting to switch between unlocked mode and the original 20 km/h speed-limited mode.
To enter the P-setting menu, press and hold the plus (+) and minus (-) buttons at the same time. Then press the power button to switch through the settings until you reach P10 mode.
| P10 Setting | Mode |
|---|---|
| 00000 | Speed limit unlocked |
| 00001 | Original 20 km/h speed-limited mode |
If you need to switch back to 20 km/h limited mode, set P10 to 00001 and test the scooter slowly before riding.
For riders who want extra front-end stability at higher speeds, a compatible steering damper for JOYOR T6E / T6E Pro can also be considered.
Is This Upgrade Worth It?
From a performance perspective: The kit helps unlock more of your JOYOR T6E / T6E Pro's potential when riding in private or legally permitted areas.
From a practical perspective: The P10 setting gives you a clear way to switch between unlocked mode and the original 20 km/h limited mode.
From an installation perspective: The controller and display kit is designed as a cleaner hardware upgrade, with no wire cutting required when installed correctly.
Also riding a JOYOR S5 ABE?
Read our JOYOR S5 speed unlock installation guide to learn how to remove the 20 km/h speed limiter, install the controller and display, and prepare your scooter for safe testing.
FAQ
Is the JOYOR T6E / T6E Pro speed unlock kit road legal?
In Germany and other regulated markets, unlocking the speed limit may make the scooter no longer legal for public-road use. It may also affect ABE approval and insurance coverage. Use unlocked mode only on private land, closed areas, or where local law allows it.
What speed can the JOYOR T6E / T6E Pro reach after unlocking?
With the controller and display speed unlock kit, the scooter can reach up to around 35 km/h in unlocked mode, depending on riding conditions, rider weight, battery level, tire pressure, and terrain.
Can I switch back to the 20 km/h speed-limited mode?
Yes. After installation, set P10 to 00001 to return to the original 20 km/h speed-limited mode.
Do I need to cut wires during installation?
No wire cutting should be required when the kit is installed correctly. Follow the installation video carefully and do not force any cables or connectors.
Does this kit fit non-ABE JOYOR T6E / T6E Pro models?
This kit is intended for compatible JOYOR T6E / T6E Pro ABE models. If your scooter is not the ABE / Germany version, check your model label and contact JOYOR Prime before ordering.
What should I do if I am not sure about installation?
If you are not familiar with scooter wiring, ask a professional technician for help or contact JOYOR Prime support.
